A Sharp JH1600e Solar Inverter would usually show an error or event code to specify a fault. We listed these codes from Sharp Solar Inverter user’s manual to give you an idea of these errors and what can be done about them.
You can refer to the table below for the list of errors and faults in your inverter.
|
Type |
Code |
Items |
| Utility abnormal | F -00 | Utility over-voltage |
| F -01 | Utility under-voltage | |
| F -02 | Utility frequency over | |
| F -03 | Utility frequency under | |
| F -06 | Anti-islanding (frequency over) | |
| F -07 | Anti-islanding (frequency under) | |
| F -08 | Miss utility synchronal lock signal | |
| F -09 | Freq. abnormal (50<->60 Hz) | |
| PV array abnormal | PV array under voltage (<60 V) | |
| P-11 | PV array over voltage (>320 V) | |
| Inverter abnormal | E15 d-15 | Relay sticking |
| E16 d-16 | Communication error | |
| E17 d-17 | Aux-power abnormal | |
| E18 | Ground fault | |
| d-20 | Temperature sensor broken | |
| E21 d-21 | Output over current | |
| E22 d-22 | DC offset over rating | |
| E23 d-23 | Fin high temperature | |
| E26 d-26 | DC/DC converter abnormal | |
| E27 d-27 | Relay open | |
| E28 | DC bus voltage abnormal | |
| EEPROM | d-40 | EEPROM abnormal |
The codes that start with F- are usually caused by the power from the street (the grid) being outside the Sharp JH1600e Solar Inverter’s operating parameters. The inverter codes beginning with P specify that the voltage coming from the solar panels is outside the inverter parameters. The error that starts with E- signifies a more serious error. If this continues it changes to a d code. When this happens, a manual shutdown procedure is necessary.
If your Sharp JH1600e Solar Inverter is still within the warranty period you can contact the equipment installer or supplier should the error persists. If your inverter is outside the warranty period we suggest that you contact a professional solar power expert. If you’re in the Gold Coast or Brisbane area contact Gold Coast Power Solutions here and we will be in touch to provide you with further assistance.
You can also check other information in the Sharp JH1600e inverter manual’s Troubleshooting section to learn more on how to fix some errors on your own.
Got A Question About Solar Power? Click Here For Answers!
- Can you add more solar panels to your solar power system?
- How much power can you expect from your solar power system?
- Do you know how to read your Energex solar power meter?
- Could you be saving hundreds of $$ on your pool power costs?
- How to make the most of the 44c feed in tariff
- How to make the most out of a low feed in tariff
The post Sharp JH1600e Solar Inverter Fault & Error Messages appeared first on Gold Coast Solar Power Solutions.